Volley Parts Help

[CJBob]

I'm working through what parts I need from PB Resource to fix up my Volley. Drano already provided a link to new plastics (thanks).

The machine came with leg bolts connected to nuts on the inside but no plate, just individual nuts. I assume this is what I need for the inside is 4 of these leg-tees:

http://www.pbresource.com/hhouse/leg-tee.jpg

While we're on the subject I need new legs, according the chart I need 27" #LEG-27CA, although I know where I can get some 22" cheap ;-)

I need new acorn nuts for both Volley and Joker Poker, looks like GTB-SC125

And I'll order a manual so I can look stuff up in the future instead of guessing. I'm right so far?

 

[Menace]

Yep, you're on the right track. All those parts look correct.

D

 

[DRANO]

It's not so much a manual as it is a big folding schematic. They can be a bit tricky to read if you haven't ever used one.

If this is your first EM then make sure you order yourself a few Flexstone files and a switch adjustment tool. It's just about all you should ever need to repair an EM problem

 

[CJBob]

...make sure you order yourself a few Flexstone files and a switch adjustment tool. It's just about all you should ever need to repair an EM problem

I just remembered that before my first machines arrived 13 months ago I was excited to get started so I ordered a few things including a leaf adjuster tool. I realized much later they aren't for SS machines

 

[Menace]

Bob,

The leaf adjusters work great on SS machines for pop bumpers and slink shot leaf switches! Just keep the flexstone file in the toolbox on anything with gold plated contacts.

D