What is it called???

[BMHouze]

I have a post in my machine.
It's threaded and goes into the playfield, and the top has a nut at the bottom and a long cylindrical rubber on the post.
No, pointy end.
Looking to get one with a longer threaded end.
I just don't know what to call this 'post' that sits under a plastic and does not attach to it.

Thanks for any aid, Brad.

 

[luch]

picture?

 

[luch]

 

[BMHouze]

Yeah, but I need a longer one.
Mine won't quite grab.
Without the washer it will.
I tired tightening to see if I could get the under the PF section seated tighter..

 

[luch]

try taking out the bottom piece and try dremeling out some of the wood so the nut thing underneath sits further into the playfield

 

[luch]

or thinner washer

 

[BMHouze]

I am at none for now.
It will only be tight for the first 50 or so hits......
Worst case I will get a spare, flip it, and get another threaded portion and cut it longer.
Too much drop target real estate to move to get in there really good.

 

[Monkeybug]

Try using a T-Nut underneath?

 

[Pharoah007]

Try using a T-Nut underneath?

This.