Demolition Man pinball machine, in good condition, and plays in good player condition. No major issues with any mechs.
Fully shopped recently. Playfield in good condition. Cabinet is in okay shape, but some obvious wear and tear for a 32 year old machine. The Claw is working 100%.
The Good:
- New PIN2DMD color DMD
- New silicon rubbers throughout
- New Polaris Carbon pinballs
- Soran ROM and vulgar sounds installed
- NVRAM upgrade (battery removed)
- New trough Opto boards
- New captive eyeball toy
- New Red Olds 442 Hot Wheels car
- Claw is working 100%
- Fully shopped and cleaned
- Trigger handles in great shape, minimal signs of wear (see photo)
- Custom Apron Cards
The Not so Good:
- Two cracked plastics, but they have been repaired with metal protectors and tape. (no plastics are missing from the game)
- SuperJet's selection from claw requires a very precise ball drop, but not impossible
- A few burnt out lights that need to be replaced
- Chip on cabinet (see photo) and other wear and tear.
Local pickup preferred, but I might be open to shipping and would use a pinball supplier if possible.
Price: $5,500 (Traded on FB Marketplace.)
Thanks
Fully shopped recently. Playfield in good condition. Cabinet is in okay shape, but some obvious wear and tear for a 32 year old machine. The Claw is working 100%.
The Good:
- New PIN2DMD color DMD
- New silicon rubbers throughout
- New Polaris Carbon pinballs
- Soran ROM and vulgar sounds installed
- NVRAM upgrade (battery removed)
- New trough Opto boards
- New captive eyeball toy
- New Red Olds 442 Hot Wheels car
- Claw is working 100%
- Fully shopped and cleaned
- Trigger handles in great shape, minimal signs of wear (see photo)
- Custom Apron Cards
The Not so Good:
- Two cracked plastics, but they have been repaired with metal protectors and tape. (no plastics are missing from the game)
- SuperJet's selection from claw requires a very precise ball drop, but not impossible
- A few burnt out lights that need to be replaced
- Chip on cabinet (see photo) and other wear and tear.
Local pickup preferred, but I might be open to shipping and would use a pinball supplier if possible.
Price: $5,500 (Traded on FB Marketplace.)
Thanks
Attachments
-
PXL_20260209_225931311.MP.jpg164 KB · Views: 48 -
PXL_20260209_225900084.MP.jpg143.4 KB · Views: 38 -
PXL_20260209_225842904.jpg188.4 KB · Views: 38 -
PXL_20260209_225830040.TS-000.jpg175.5 KB · Views: 44 -
PXL_20260209_225821284.MP.jpg231.9 KB · Views: 43 -
PXL_20260209_225755414.TS-000.jpg154.2 KB · Views: 39 -
PXL_20260209_225729525.jpg181.1 KB · Views: 36 -
PXL_20260209_225724544.jpg213.6 KB · Views: 37 -
PXL_20260209_225701698.jpg188.2 KB · Views: 37 -
PXL_20260209_225654894.jpg112.1 KB · Views: 42
Last edited: