48V DISABLED CLOSE COIN DOOR OR PULL INTERLOCK SWITCH TO RESTORE POWER ?

[Dave Storoschuk]

JP Pro will not start, get the above message?
Any suggestions?

 

[MrMikeman]

Check the white switch on the inside left of the coin door. Make sure the wires didn‘t pop off.

 

[ZoomZoomBoomBoom]

Check to make sure the inside metal of the coin door pushes against the white post on the left, inside of the cabinet when closing the coin door. (My Rush coin door was bent inwards and wouldn't reach the post, so even when closed, the machine thought the coin door was still open).

 

[Dave Storoschuk]

Wire off the white switch
Thanks so much