Sounds like the container is getting close to closing.
Just want to send out a reminder and see if there are any additional people in Ontario that need their games transported from Gerry's place?
Once the container is on the water I will be getting quotes.
Also, if any of you on the list have...
The only issue I have with this is that I would want a nice quality playfield if I was going to display it on my wall and spend the money on this kit to light it.
That means having a fairly nice and or valuable playfield on the wall, rather than in a game.
Seems a waste
Dave already installed this mod. Sounds like it's working great for him. He may have a later production game with v.8 of the sound code.
I ordered the sound ROM but I was having no issues with random callouts last night. I guess it is intermittent?
Re: URGENT - need a couple things ASAP
I have the small rubbers you need.
What have you gotten so far?
Also, if you place an order with SB online, it's usually there next day
I think you'll enjoy it. The balrog hits alone are cool. The multi-balls really shake on any jackpot shot.
One thing I forgot to mention:
Make sure to leave the game on normal boot setting. Do not change your settings to "fast boot". When you change the ROMs the factory defaults will do this...
Yes, I'm selling another one :FP:
This is my 1981 1st edition Eight Ball Deluxe. Without a doubt the most attractive and collectible of the three versions produced of this popular game.
The game is in fantastic condition and plays perfectly.
It has an original playfield with almost no signs...
Our last connection will be in the head.
You can plug in the 7-pin connector on the control board above the shaker.
Then, find the other end of the harness. There is a brown and white wire with a molex connector.
Feed this under the playfield (try to insert it into the plastic wiring clips...
Okay, the home stretch ;)
You LOTR guys will be getting power via this 12V circuit that conveniently travels through the coin door switch. This switch normally controls power to the solenoids depending on whether the door is open or closed. Make sure to locate the lug at the top of the top-most...
Okay, now we can properly install our shaker.
For those of you installing a regular shaker on a newer machine, this is about where you would start since you don't need new chips or drilling.
The motor gets screwed through the cabinet and to the threaded inserts we pounded into the holes. Make...
If you have never seen a Stern shaker kit, here is what you get in the box.
Clockwise from upper left:
Plastic tub housing, shaker motor, wiring harness/zip ties, control board and a bag of hardware.
You also get this handy template that you can cut and place in the bottom of the cabinet (to...
These are the chips mentioned above (minus the sound ROM).
The smaller one is the PAL chip from PINBITS
NOTE: if you are installing a shaker in a newer game like Tron, ACDC, etc. you will not need to change any chips at all. This step is only for original runs of standard LOTR
This is a...
For anyone who's ever wanted to install a shaker motor in a standard LOTR (only the LE version was able to support this from factory) there is a great how-to guide on pinside posted by MARKMON. I did this mod last night and it works pretty well.
I'm copying a lot of Markmon's directions here...
I finally got around to installing a shaker motor in my standard LOTR!
It was a bit more involved than a standard shaker install, but not too bad and very rewarding when I played my first game and the Balrog shots rocked the game!!!
I'll post a step-by-step in another thread
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.