• We have upgaded to the latest version of XenForum and the process finished without any errors!!!! Enjoy the new forum!

3D Printers and Pinball

B

BMGfan

New Member
Nov 20, 2023
16
3
3
39
Calgary
Chris Bardon said:
I bought these remote controlled outlets for my games ages ago, and I noticed the velcro that was holding the remote to the wall was starting to tear the paint off, so I made this today. Nothing too fancy, but I did make countersink cutouts for the mounting screws:
View attachment 30799
Click to expand...
I did a similar designed print for the remotes in the bedroom, the wife is pretty supportive of my hobbies and that's the one she love the most....the simplest one :p
 
gunner007

gunner007

Active Member
Jan 26, 2024
432
143
43
57
kingston Ontario
Anyone have a UM or Iron Maiden playfield scan?
I want to get some measurements off of them.
and my first attempt at a 3D print for my RG. Using tinkercad. I'll see how it works out.
Also a rollerskate keychain for the change door.
 

Attachments

  • rollergameglasscover.jpg
    rollergameglasscover.jpg
    159.8 KB · Views: 3
P

pinballjah

Super Member
Jan 25, 2017
1,508
597
113
Toronto
Morning, anyone able to print the PF images for me? I think I have the files. Hopefully they can be printed without the stand. Thanks.

1713102498971.png
 
Chris Bardon

Chris Bardon

Well-Known Member
Nov 15, 2012
1,426
255
83
Mississauga, ON
I'm looking for an STL for the clips that people were making to hold the coin door interlock buttons in on modern games. I know I've seen these before, but I can't find it on thingiverse/yeggi, and it might just be searching for the wrong thing. It's just a piece that clips over the interlock switch so that it keeps it held in while the coin door is open. Useful for tournaments when you want to remove stuck balls without killing the PF power. Just trying to see what's out there before I just design my own.
 
mwong168

mwong168

Administrator
Staff member
Nov 14, 2012
6,700
1,539
113
48
Toronto
1773164904092.png

I this saved as service switch actuator and might be what you are looking for?
 

Attachments

  • service_switch_actuator.zip
    7.3 KB · Views: 1
Chris Bardon

Chris Bardon

Well-Known Member
Nov 15, 2012
1,426
255
83
Mississauga, ON
Ended up making my own clips and putting the STLs here: https://www.thingiverse.com/thing:7314480. Needed 3 different sizes to fit all the games. For the spike2 one, I just need to make sure that wire bundle doesn't push the clip off:

PXL_20260313_131756235.NIGHT.jpg
pxl_20260313_131735463-night-jpg.38463
PXL_20260313_131717160.jpg
 

Attachments

  • PXL_20260313_131735463.NIGHT.jpg
    PXL_20260313_131735463.NIGHT.jpg
    105.9 KB · Views: 25
  • Like
Reactions: mwong168
MrMikeman

MrMikeman

Super Member
Nov 25, 2019
1,087
952
113
Ottawa
Shouldn't you be covering only the coil power interlock? By covering the door switch as well you are disabling the tilt prevention during a ball recovery (tournament), assuming you set the appropriate setting..
 
You must log in or register to reply here.
Top Bottom