ANSWER TRON recognizer beam issues

[thewebexpert]

My Tron Pro laser beam for the recognizer must be out of alignment, it just randomly starts going off and you hear the cheering and then you get immediate multiball. Does not look like there is any access to the components from the bottom... Has anyone had this problem before and have some tips before I start taking things apart?

Thanks!

 

[movingpictures]

Very common on Tron.
You will need to disassemble and have a look at the optos.
Could be cold solder on an opto wire, or the optos need replaced.

 

[thewebexpert]

I fixed it, I just used a qTip and some invisiglass and give it a good clean ... seems to have just been dust, cat hair, something , for a closed machine, it seem gets dirty I suppose. Now it is working perfectly!