Just picked up a WCS94 but only have room for two machines so one of these has to go. Not picky which one goes first but only want to sell one right now. Looking to get $3000 for the Hook or $2500 for the Rollergames. Both are in perfect working order and all LED (except the flashers on the Hook). Located in North Bay, easy carry out up a few stairs from the basement out through the garage.
Hook has a few cracked plastics: the side of the skull, the 2 and 3 skill shot holes and a bit of the pirate town plastic on the left side. Has one insert starting to lift in front of the windcoaster ramp but not too bad. Has a few slingshot brackets repaired underneath. Cab has typical wear and back glass has a few scratches. Power supply was rebuilt when I got it, I've since added an auxiliary supply for the sound board to quiet it down. Play field in good shape, Cliffy's installed on the scoop holes. Installed a brand new Rufio ramp from Freeplay40 on pinside. Few light mods in the skull, pirate town, Hook topper, in the ball trough and scoop holes. All new rubbers and balls and coil sleeves throughout. Superbands on the flippers. NVRAM and Chad from pinballcode.com improved code v5.01 installed as well which totally changes the game for the better. Full gallery here: https://www.flickr.com/photos/35422385@N07/albums/72157709346689941
Rollergames is in really good shape. Cabinet only has some minor wear. Few bubbles in the mylar over some inserts and the ramp entrance is cracked a bit but totally functional. Ramp guard installed to further protect it. I installed some decals on a few inserts that had worn off. Magnet area is a little worn but works perfectly. Rebuilt all the flippers including new flipper switches and changed the springs to from over the plunger to WPC style on the ends of the arms, new rubbers, balls and coil sleeves throughout. Superbands on the flippers. Installed a new diverter arm bracket from jasonpaulbauer on pinside which works perfectly now. A few custom lighting mods installed including the flipper buttons, the ball trough, pit VUK, WAR logo up at the top and a strip where the ball launches. Replaced a lighting connector, installed a remote battery box and rebuilt the power supply in the backbox. Full gallery here: https://www.flickr.com/photos/35422385@N07/albums/72157694742220601/with/40155602400/
Hook has a few cracked plastics: the side of the skull, the 2 and 3 skill shot holes and a bit of the pirate town plastic on the left side. Has one insert starting to lift in front of the windcoaster ramp but not too bad. Has a few slingshot brackets repaired underneath. Cab has typical wear and back glass has a few scratches. Power supply was rebuilt when I got it, I've since added an auxiliary supply for the sound board to quiet it down. Play field in good shape, Cliffy's installed on the scoop holes. Installed a brand new Rufio ramp from Freeplay40 on pinside. Few light mods in the skull, pirate town, Hook topper, in the ball trough and scoop holes. All new rubbers and balls and coil sleeves throughout. Superbands on the flippers. NVRAM and Chad from pinballcode.com improved code v5.01 installed as well which totally changes the game for the better. Full gallery here: https://www.flickr.com/photos/35422385@N07/albums/72157709346689941
Rollergames is in really good shape. Cabinet only has some minor wear. Few bubbles in the mylar over some inserts and the ramp entrance is cracked a bit but totally functional. Ramp guard installed to further protect it. I installed some decals on a few inserts that had worn off. Magnet area is a little worn but works perfectly. Rebuilt all the flippers including new flipper switches and changed the springs to from over the plunger to WPC style on the ends of the arms, new rubbers, balls and coil sleeves throughout. Superbands on the flippers. Installed a new diverter arm bracket from jasonpaulbauer on pinside which works perfectly now. A few custom lighting mods installed including the flipper buttons, the ball trough, pit VUK, WAR logo up at the top and a strip where the ball launches. Replaced a lighting connector, installed a remote battery box and rebuilt the power supply in the backbox. Full gallery here: https://www.flickr.com/photos/35422385@N07/albums/72157694742220601/with/40155602400/