Best Dolly to Buy for moving pins?

Ive always used pneumatic tires. I like them because they arent as rough on hard floors like tile and wood.

Totally up to you.

The best benefit of the appliance dolly is the back of the posts have the stair angle helpers/protectors.


So really, its based on where you will be using it most (as wong pointed out)

My old dolly (before the one pictured above):

I have one with the stair climber feature like the first ones shown. Then you can smoothly lower it down stairs with no jolts.

I can move pins myself with it ( well move them in anyways, none have left so far!)

Having a piece of plywood as a ramp to get over thresholds is handy especially if the dolly has small wheels.

I bought the appliance dolly with the stair climber feature from Home Depot and very happy with it. The dolly itself is quite heavy. I have hardwood on the stairs and this dolly does not leave a mark. One thing I learned though is that, the wheel on these picked up some ice melter that I had put down. These then left some marks on the floor. So, make sure when you're moving pins in the winter. Wipe down the wheels, once inside.

FastEd said:

I bought the appliance dolly with the stair climber feature from Home Depot and very happy with it. The dolly itself is quite heavy. I have hardwood on the stairs and this dolly does not leave a mark. One thing I learned though is that, the wheel on these picked up some ice melter that I had put down. These then left some marks on the floor. So, make sure when you're moving pins in the winter. Wipe down the wheels, once inside.

Click to expand...

An easy way to combat this issue is to slide games over hard floors.

Once a game is in my front door, I stand it up on a thick (soft) blanket, and it glides right through the house.

You can see the blankets in this photo:

If you put one machine on the blanket, then just slide them together and its super easy.

I've moved a lot of machines and an appliance dolly like the one illustrated at Princess Auto with the one-crank tightener is the one you want. It is easier to tighten / loosen the strap (which needs to be snug but not overtight - loose or too tight can damage soft rails) and more reliable in the long term (the ratchets eventually wear down).

The appliance dolly's most important feature is the stair gliders at the back which are fan belts in a track (like little tractor belts). That lets you slide the load up or down each stair edge without the "bump" or hard pull that a hand truck with pneumatic wheels would need.

If the load is really heavy and the stair treads are soft wood, then they can scratch or put black marks on the tread bullnoses. In those cases I tend to use a large cloth under the dolly (which has it's own hazards).

Sometimes I keep the pin attached to the dolly and tilt the whole thing back into my truck (which slides in really easily).

Appliance dollies also are quite maneuverable because of the small solid tires, which makes negotiating corners (even going around stair landings) easier in many cases where you don't have a helper.

If you buy a cheaper made by our cousins from China version (which is most of them), do yourself a favour and trade out the belts for quality replacements. Often the originals disintegrate quickly, leave black rubber marks and break easily. Check that the tractor works smoothly and lubricate with silicone lube if necessary.

It's handy to also have a hand truck dolly around with pneumatic tires (or large solid rubber tires) for moving pins outdoors on dirt/grass for sure. But for indoors and downstairs nothing beats or is safer than the appliance dolly (assuming no one could afford a motorized stair climber for two pins - and they're often too large and heavy for home use anyway). There are appliance dollies with a kick out stand at the back, that is meant to be able to keep a large object steady while tilted backwards so it doesn't fall back on to the operator.

"Aluminum Dolly" - hmmm.... the back tilt wheels position would make it easier to glide on a solid surface, but the large wheels will make it less manoeuvrable in tight spaces, and aluminum (although rated for 800-1000 lbs) is a questionable material for longevity IMHO (I have an aluminum truck for my tools and mobile supplies that wouldn't hold a pin - but I haven't experienced this larger dolly so it might be stronger than I am thinking). Aluminum would be a benefit though as the steel ones add 70-80 lbs to the load you are hauling up stairs.

Some other quick tips for appliance dollies and moving pins:

if you tighten a strap and the buckle is up against a cabinet, it WILL scratch the cabinet unless you wrap the loose end of the strap around the buckle so as to cushion it away from the cabinet.

Some people poo poo straps in a hurry, however even with a hand truck, a solid strap or cargo cord is a God send if your load shifts as it will tend to keep a load that is leaning away from the back of the dolly from dumping forward.

If I have one, I like a helper at the bottom of the dolly to help steady a load (either up or down stairs), or to help lift the load a touch over structural curbs. HOWEVER, be very aware that sometimes a pinball cabinet will ride up a dolly (particularly if a helper lifts on the cabinet and not on the dolly bottom) and when you hit a bump or head over the edge of a top stair, the load can suddenly shift down on to the dolly's footing. Fingers beware!

Do not let an amateur "dead man" carry a pin without warning them NOT to slide their hands along the bottom edge of a cabinet. Usually the plywood cabinets have great big slivers and I've seen a 3 inch one get embedded in the hand of a "helper" that required a trip to emergency to remove and stitches.

Gloves come in handy for this and I find they let me lift and handle weights or edges that would otherwise be painful particularly if held up for a while.

The one way I saw a floor really get wrecked was when a pin was at the top of the stairs, on its "glider feet" on the back and the owner (not me) started shifting the pin to slide it and forgot that one of the "gliders" was warn down to its nail... yikes, it was a nice hardwood and I'd never seen a wife hyperventilate so much before.

just a heads up for those that might be interested in that all in one dolly it has come up at canadian tire once again for 50 percent off

http://www.canadiantire.ca/en/pdp/aluminum-hand-truck-0600527p.html

heads up that the Princess Auto dolly is also on sale for 50% off ($59.99)

http://www.princessauto.com/en/detail/550-lb-appliance-hand-truck/A-p8095937e

+1 on the appliance dolly, especially if you have a stairwell as tight as mine. Warlock picked up my RG the other day, and with the head off, the machine went up the stairs in under a minute. I'm definitely going to pick one up.

Hey All,

I realize this is an old thread but wanted to check in regarding peoples experiences with stair-climbing carts - I'm looking to purchase one and the home depot website seems to have one with the ability to climb stairs, but it doesn't seem to have the same 'down the stairs' capability of the Escalera (the cadillac, I know) -- anyone have any experience with newer dolly's they might recommend?

I have a Power Mate - I bought it here in Toronto. The L1 model.
They are not cheap - but I just loaded 16 pins out of my basement - drove to Edmonton through a freak snowstorm with the Powermate strapped to the trailer - and unloaded into another basement - all on one charge. I was impressed. It lets you balance the pins on the cart by lowering the wheels. Moving all my pins would have been impossible without it.

https://www.powermate.info/powermate_handtruck_l-1

It moves using a screw mechanism. I like it better than the Escalera - it seems more stable to me. I used an Escalera in the past but hated the way the weight shifted as I moved the pins.

goodmanners said:

I have a Power Mate - I bought it here in Toronto. The L1 model.
They are not cheap - but I just loaded 16 pins out of my basement - drove to Edmonton through a freak snowstorm with the Powermate strapped to the trailer - and unloaded into another basement - all on one charge. I was impressed. It lets you balance the pins on the cart by lowering the wheels. Moving all my pins would have been impossible without it.

https://www.powermate.info/powermate_handtruck_l-1

It moves using a screw mechanism. I like it better than the Escalera - it seems more stable to me. I used an Escalera in the past but hated the way the weight shifted as I moved the pins.

Click to expand...

Thank you sir! I shall look into the power mate.

The Power Mate was around $3K including tax - the L-1 model. Roughly the same ballpark as an Escalara but again I liked the way it operated. You can stabilize/balance the pin and even let it rest while on the stairs. You hook onto the pin and strap it, then raise the wheels a bit and tip it back so it rests at an angle perfectly balanced. You can lift pins from the ground onto the truck tailgate. You can quickly lift pins over height differences like a door jamb.

It's made in Canada if you care about that - bought mine here in Toronto direct from the dealer.

I had hip surgery in November and 2 weeks after I moved a pin from my garage up 5 steps and into the house. Not smart I know but if you are patient there is almost no muscling of the pin required. You let gravity and the climber do all the work.

https://i.imgur.com/SWINi6z.jpg

They are heavy. They are a bit clunky. But they are a back saver.

My .02